Table of Contents
Advertisement
Figure 136 Trigger Port Forwarding Process: Example
Jane requests a file from the Real Audio server (port 7070).
1
Port 7070 is a "trigger" port and causes the Zyxel Device to record Jane's computer IP address. The Zyxel
2
Device associates Jane's computer IP address with the "open" port range of 6970-7170.
The Real Audio server responds using a port number ranging between 6970-7170.
3
The Zyxel Device forwards the traffic to Jane's computer IP address.
4
Only Jane can connect to the Real Audio server until the connection is closed or times out. The Zyxel
5
Device times out in three minutes with UDP (User Datagram Protocol) or two hours with TCP/IP (Transfer
Control Protocol/Internet Protocol).
Click Network Setting > NAT > Port Triggering to open the following screen. Use this screen to view your
Zyxel Device's trigger port settings.
Figure 137 Network Setting > NAT > Port Triggering
Chapter 11 Network Address Translation (NAT)
DSL
VMG/XMG Series User's Guide
229
Advertisement
Table of Contents
