Table of Contents
Advertisement
Chapter 41 Backup Restore
Figure 235 Reset Warning Message
Figure 236 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Zyxel Device.
Refer to
Section 1.4.5 on page 53
for more information on the RESET button.
41.3 The Reboot Screen
System Reboot allows you to reboot the Zyxel Device remotely without turning the power off. You may
need to do this if the Zyxel Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the Zyxel Device reboot. This does not affect the
Zyxel Device's configuration.
Figure 237 Maintenance > Reboot
VMG/XMG Series User's Guide
364
Advertisement
Table of Contents
