Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 106 Security > MAC Filter
LABEL
DESCRIPTION
MAC Address Filter
Select Enable to activate the MAC filter function.
MAC Restrict Mode
Select Allow to only permit the listed MAC addresses access to the Zyxel Device. Select
Deny to permit anyone access to the Zyxel Device except the listed MAC addresses.
Add New Rule
Click this button to create a new entry.
Set
This is the index number of the MAC address.
Active
Select Active to enable the MAC filter rule. The rule will not be applied if Allow is not
selected.
Host Name
Enter the host name of the wireless or LAN clients that are allowed access to the Zyxel
Device.
MAC Address
Enter the MAC addresses of the wireless or LAN clients that are allowed access to the Zyxel
Device in these address fields. Enter the MAC addresses in a valid MAC address format, that
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Delete
Click the Delete icon to delete an existing rule.
Cancel
Click Cancel to restore your previously saved settings.
Apply
Click Apply to save your changes.
Chapter 19 MAC Filter
VMG/XMG Series User's Guide
273
Advertisement
Table of Contents
