The User Account Add/Edit Screen - ZyXEL Communications VMG8825-B Series User Manual

34.2.1 The User Account Add/Edit Screen

Click Add New Account or the Edit icon of an existing account in the Maintenance > User Account to
open the following screen.
Figure 168 Maintenance > User Account > Add/Edit
The following table describes the labels on this screen.
Table 134 Maintenance > User Account > Add/Edit
LABEL
Active
User Name
Password
Verify Password
Retry Times
Idle Timeout
Lock Period
Group
OK
Cancel
Chapter 34 User Account
DESCRIPTION
This field indicates whether the user account is active or not.
Clear the check box to disable the user account. Select the check box to enable it.
Enter a new name for the account. This field displays the name of an existing account.
Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the VMG.
Type the new password again for confirmation.
Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
Enter the length of inactive time before the VMG will automatically log the user out of the web
configurator.
Enter the length of time a user must wait before attempting to log in again after a number if
consecutive wrong passwords have been entered as defined in Retry Times.
Specify whether this user will have Administrator or User privleges.
Click OK to save your changes.
Click Cancel to restore your previously saved settings.
VMG8825-B Series User's Guide
282