The Sip Service Provider Screen - ZyXEL Communications VMG8924-B10D User Manual

Table 100 VoIP > SIP > SIP Account > Add new account/Edit (continued)
LABEL
Warm Line Timer
Enable Missed Call
Email Notification
Mail Account
Send
Notification to
Email
Missed Call
Email Title
Early Media
IVR Play Index
Music On Hold
(MOH)
IVR Play Index
Apply
Cancel

22.4 The SIP Service Provider Screen

Use this screen to view the SIP service provider information on the VMG. Click VoIP > SIP > SIP Service
Provider to open the following screen.
Figure 128 VoIP > SIP > SIP Service Provider
Each field is described in the following table.
Table 101 VoIP > SIP > SIP Service Provider
LABEL
Add new provider
#
SIP Service
Provider Name
SIP Proxy Server
Address
Chapter 22 Voice
DESCRIPTION
Enter a number of seconds that the VMG waits before dialing the warm line number
if you pick up the telephone and do not press any keys on the keypad.
Select this option to have the VMG e-mail you a notification when there is a missed
call.
Select a mail account for the e-mail address specified below. If you select None
here, e-mail notifications will not be sent via e-mail.
You must have configured a mail account already in the Email Notification screen.
Notifications are sent to the e-mail address specified in this field. If this field is left
blank, notifications will not be sent via e-mail.
Type a title that you want to be in the subject line of the e-mail notifications that the
VMG sends.
Select this option if you want people to hear a customized recording when they call
you.
Select the tone you want people to hear when they call you.
This field is configurable only when you select Early Media. See
page 231 for information on how to record these tones.
Select this option to play a customized recording when you put people on hold.
Select the tone to play when you put someone on hold.
This field is configurable only when you select Music On Hold. See
page 231 for information on how to record these tones.
Click this to save your changes and to apply them to the VMG.
Click this to set every field in this screen to its last-saved value.
DESCRIPTION
Click this button to add a new SIP service provider.
This is the index number of the entry.
This shows the name of the SIP service provider.
This shows the IP address or domain name of the SIP server.
VMG8924-B10D/B30D User's Guide
222
Section 22.10 on
Section 22.10 on