Konica Minolta bizhub 266 User Manual page 80

7
6
Enter the IP address of the destination.
7
Press the OK key.
The screen returns to the mobile setting screen.
8
Use the +/, key to select [PORT NO.], then press OK key.
9
Enter the port number.
10
Press the OK key.
The screen returns to the mobile setting screen.
11
If a password is specified for a destination, use the +/, key to select [ACCOUNT], then press the OK
key.
12
Enter the user name.
% A maximum of 20 characters can be entered.
13
Press the OK key.
The screen returns to the mobile setting screen.
14
Use the +/, key to select [PASSWORD], then press the OK key.
15
Enter the password.
16
Press the OK key.
The screen returns to the mobile setting screen.
17
Press the Start key.
18
Use the +/, key to select [AUTO DETECTION] or [MANUAL].
% If [AUTO DETECTION] is selected, press the OK key and go to Step 8.
% If [MANUAL] is selected, scanning size can be selected. Press the ) key and go to Step 6.
19
Use the +/, key to select desired scanning size, then press the OK key.
% By pressing [INCH] or [METRIC], the measuring scanning size can be changed.
20
Press the OK key.
21
Check the content of setting, then press the OK key.
Scanning starts and [NEXT PAGE?] is displayed.
% When scanning multiple sheets of the original, set the next original on the Original Glass, then press
the OK key. Repeat the above procedure for all sheets of the original.
22
When all the originals have been scanned, press the Start key.
Sending starts.
7-6
150dpiBW TIFF 90%
TEXT/PHOTO
NEXT PAGE? (AUTO)
SCAN=OK (SEND=START)
Basic transmission method
AUTO
7.1
bizhub 306/266