Error Of Scan To Usb - Konica Minolta bizhub 266 User Manual

10
10.3

Error of Scan to USB

Message
[USB MEMORY FULL]
[USB Dev.Not support]
[USB Hub Not support]
[COMMUNICATION ERROR]
[USB Memory]
[DISCONNECT]
[USB Memory]
10-6
Cause
The memory capacity of the USB
is less than the data size to be
scanned.
A non-USB memory stick or a
type of USB memory that cannot
be written to (a write-protected
one) is used.
USB hubs are not supported.
Communication with the USB
memory could not be estab-
lished.
The connection to the USB
memory has been interrupted.
Error of Scan to USB
Correction action
Either increase the amount of
available space by deleting files
on the USB memory, or use an-
other USB memory that has
more available memory space.
Use a writable USB memory
stick.
Remove the USB hub and insert
a USB memory stick.
Check that the USB memory is
connected correctly.
Check that the USB memory is
connected correctly.
bizhub 306/266
10.3