M.2 Ssd Module; Removing The M.2 Ssd Module; Installing The M.2 Ssd Module - Dell 0G8DW Installation And Service Manual

M.2 SSD module

Removing the M.2 SSD module

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the air shroud.
4 Remove the BOSS card.
NOTE: Removing the BOSS card is similar to the procedure for removing an expansion card riser.
Steps
1 Loosen the screws and lift the retention straps that secure the M.2 SSD module on the BOSS card.
2 Pull the M.2 SSD module away from the BOSS card.
Figure 63. Removing the M.2 SSD module
1 module connector (2)
3 module (2)
Next step
Install the M.2 SSD module.

Installing the M.2 SSD module

Prerequisite
1 Follow the safety guidelines listed in
116 Installing and removing system components
Safety instructions.
Before working inside your
Safety instructions.
system.
2 screws (2)