Table of Contents
Advertisement
Figure 65. Installing expansion cards into the expansion riser 1A
Figure 66. Installing an expansion card into the expansion riser 2A
Next steps
1. After installing a card into the riser 1, close the PCIe card holder latch. If applicable, close the PCIe guide after installing the
expansion card.
2. Follow the procedure listed in
3. Install any device drivers required for the card as described in the documentation for the card.
M.2 SSD module
Removing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in
After working inside your system
Safety instructions
on page 35.
on page 34.
Installing and removing system components
85
Advertisement
Table of Contents
