Dell 0G8DW Installation And Service Manual page 15

Icon Description Condition
PCIe The indicator turns solid amber if a
indicator PCIe card experiences an error.
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
System health and system ID indicators
Table 6. System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
iDRAC Quick Sync 2 indicators
Table 7. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Off (default state)
Corrective action
Restart the system. Update any required drivers for the PCIe card. Reinstall
the card.
If the problem persists, see
Condition
Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC Quick
Getting
Condition
Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem persists,
see the Getting help section.
Indicates that the system is experiencing a fault. Check the System
Event Log or the LCD panel, if available on the bezel, for specific error
messages. For information about the event and error messages
generated by the system firmware and agents that monitor system
components, see the Error Code Lookup page at qrl.dell.com.
Corrective action
If the LED fails to turn on, reseat the left control panel
flex cable and check. If the problem persists, see the
Getting help
Dell EMC PowerEdge R640 system overview
help.
section.
15