Dell 0G8DW Installation And Service Manual page 17

Item
2
3
4
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The
following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 9. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Solid green for two seconds Indicates that the laptop or tablet is connected.
Flashing green (on for two
seconds and off for two
seconds)
Turns off
Indicator or button
USB port
iDRAC Direct LED
iDRAC Direct port (Micro-AB
USB)
Condition
Indicates that the laptop or tablet connected is recognized.
Indicates that the laptop or tablet is unplugged.
Icon
N/A
Dell EMC PowerEdge R640 system overview
Description
NOTE: Press the power
button to gracefully shut
down an ACPI-compliant
operating system.
The USB ports are 4-pin, 2.0-
compliant. This port enables you
to connect USB devices to the
system.
The iDRAC Direct LED indicator
lights up to indicate that the
iDRAC Direct port is actively
connected to a device. For more
information, see the iDRAC
Quick Sync 2 indicator codes
section.
The iDRAC Direct (Micro-AB
USB) port enables you to access
the iDRAC Direct (Micro-AB)
features. For more information,
see the Integrated Dell Remote
Access Controller User's Guide
at Dell.com/
poweredgemanuals.
17