Removing The Backplane Cover - Dell 0G8DW Installation And Service Manual

Figure 80. 8 X 2.5 drive backplane
1 release tab (2)
3 backplane signal cable connector
5 SAS cable B connector
Figure 81. 10 X 2.5 drive backplane
1 release tab (2)
3 NVMe cable connector
5 NVMe cable connector
7 NVMe cable connector
9 backplane to expander board cable connector

Removing the backplane cover

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the system cover.
Steps
1 Slide the backplane cover in the direction of the arrows marked on the backplane cover.
2 Lift the backplane cover away from the system.
Safety instructions.
Before working inside your
2 SAS cable A connector
4 backplane
6 power cable connector
2 NVMe cable connector
4 NVMe cable connector
6 power cable connector
8 backplane to expander board cable connector
system.
Installing and removing system components 131