Sas Expander Card; Removing The Sas Expander Card - Dell 0G8DW Installation And Service Manual

Figure 92. Cable routing - 8 x 2.5 drive backplane with onboard SATA
1 drive backplane
3 backplane signal cable(BP: J_BP_SIG to MB: J_BP_SIG1)
5 system board
7 cable routing clip

SAS expander card

Removing the SAS expander card

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the cooling shroud.
4 Remove the cooling fan assembly.
5 Remove the backplane
6 Disconnect the SAS cables from the SAS expander card.
Steps
1 Using Philips #2 screwdriver, loosen the screws that secure the SAS expander card to the expander card tray.
2 Pull the SAS expander card to disengage the connectors on SAS expander from the SAS connectors on backplane.
Safety instructions.
Before working inside your
cover.
2 cable routing clip
4 backplane power cable(BP: J_BP_PWR_A1 to MB: J_BP1)
6 SATA cable(BP: J_SAS_A0, J_SAS_B0 to MB: SATA_A,
SATA_B)
system.
Installing and removing system components 141