Table of Contents
Advertisement
Setting up your system
Perform the following steps to set up your system:
1
Unpack the system.
2
Install the system into the rack. For more information about installing the system into the rack, see the Rail Installation Guide at
Dell.com/poweredgemanuals.
3
Connect the peripherals to the system.
4
Connect the system to its electrical outlet.
5
Power on the system by pressing the power button or by using iDRAC.
6
Power on the attached peripherals.
For more information about setting up your system, see the Getting Started Guide that shipped with your system.
iDRAC configuration
The Integrated Dell Remote Access Controller (iDRAC) is designed to make system administrators more productive and improve the overall
availability of Dell systems. iDRAC alerts administrators about system issues and enables them to perform remote system management.
This reduces the need for physical access to the system.
Options to set up iDRAC IP address
To enable communication between your system and iDRAC, you must first configure the network settings based on your network
infrastructure.
NOTE:
For static IP configuration, you must request for it at the time of purchase.
This option is set to DHCP by Default. You can set up the IP address by using one of the following interfaces:
Interfaces
Document/Section
iDRAC Settings
Dell Integrated Dell Remote Access Controller User's Guide at
utility
Dell Deployment
Dell Deployment Toolkit User's Guide at
Toolkit
Dell Lifecycle
Dell Lifecycle Controller User's Guide at
Controller
Server LCD panel
LCD panel
iDRAC Direct and
See Dell Integrated Dell Remote Access Controller User's Guide at
Quick Sync 2
(optional)
NOTE:
To access iDRAC, ensure that you connect the ethernet cable to the iDRAC9 dedicated network port. You can also access
iDRAC through the shared LOM mode, if you have opted for a system that has the shared LOM mode enabled.
44
Initial system setup and configuration
Initial system setup and configuration
Dell.com/openmanagemanuals
Dell.com/poweredgemanuals
section
Dell.com/poweredgemanuals
> OpenManage Deployment Toolkit
Dell.com/poweredgemanuals
4
Advertisement
Table of Contents
