Superior Fireplaces DRC3000-B Series Installation And Operation Instruction Manual page 64

Innovative Hearth Products
DRC3000-B Series Direct-Vent Gas Fireplaces
MAINTENANCE SCHEDULE
See the tables below for detailed information about required maintenance, both regular and annual.
Maintenance Performed Annually—Before the Burning Season
Maintenance Task
Inspecting/Cleaning Burner, Logs, and
Controls
Check Flame Pattern and Flame Height
Inspecting/Cleaning Pilot and Burner
Checking Vent System
Appliance Inspection
Maintenance Performed Periodically—After the Burning Season
Maintenance Task
Cleaning Firebox Interior
Check Flame Pattern and Flame Height
Checking Vent System
Cleaning Front Glass Door
64
Performed By
Qualified Service Technician
Qualified Service Technician
Qualified Service Technician
Qualified Service Technician
Qualified Service Technician
Performed By
Homeowner
Homeowner
Homeowner
Homeowner
Procedure
Inspect valve and ensure it is properly
operating. Check piping for leaks. Vacuum
the control compartment, fireplace logs, and
burner area.
Verify the flame pattern and height displayed
by the appliance. Flames must not impinge
on the logs.
Remove any surface build-up on pilot and
burner assembly. Wipe the pilot nozzles,
ignitor/flame, rod, and hood. Ensure the pilot
flame engulfs the flame sensor.
Inspect the vent system at the top and at
the base (within the firebox) for signs of
blockage or obstruction. Look for any signs
of dislocation of the vent components.
Perform the appropriate appliance inspection
procedure detailed in this manual.
Procedure
Carefully remove logs and glowing embers
(rockwool). Vacuum out interior of the
firebox. Clean firebox walls and log grate.
Replace logs and glowing embers as detailed
in this manual.
Verify the flame pattern and height displayed
by the appliance. Flames must not impinge
on the logs.
Inspect the vent system at the top and at
the base (within the firebox) for signs of
blockage or obstruction. Look for any signs
of dislocation of the vent components.
Clean as necessary following the directions
provided in this manual.
Do not touch or attempt to clean the glass
while hot.
Operation
901191-00C, 07/2023