Innovative Hearth Products
DRC3000-B Series Direct-Vent Gas Fireplaces
7. Place log #5 using pin in log #4 and resting on the front metal ramp (Figure 41).
8. Place log #3 using pins on log #1 and log #2. Place log #6 as seen below making sure not to block any burner
Figure 42
Installing the Rock Kit
NOTE: Accessory Rock Kit shall not be used when Accessory Log Kit is installed.
1. Place rocks as seen in Figure 43A below. Rocks shall not be placed over burner ports. Flame impingement could
46
Figure 41
ports (Figure 42). Fill large center open area with one layer of glass media and installation is complete (Figure
42A).
Log #3
Log #6
result in formation of soot on rocks and/or glass. No rock or log kit shall be used in conjunction with any other
log or rock kit.
Figure 43A
Log #5
Figure 42A
Installation
901191-00C, 07/2023