Superior Fireplaces DRT40 Series Installation And Operation Instructions Manual

Superior Fireplaces DRT40 Series Installation And Operation Instructions Manual

Multi-view direct-vent gas fireplaces
Hide thumbs Also See for DRT40 Series:

Advertisement

Quick Links

P/N 900299-00 Rev. F 02/2019
Ce manuel est disponible en francais, simplement
en faire la demande. Numéro de la pièce 900299-02.
P900299-00
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future
reference.
This appliance may be installed in an aftermarket permanently located, manufactured home (USA only)
or mobile home, where not prohibited by local codes. This appliance is only for use with the type of gas
indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit
is used.
Cet appareil peut installé dans une maison préfabriquée (mobile) déjà installée à demeure, si les réglements
locaux le permettent. Ce appareil doit être utilisé uniquement avec le type de gaz indiqué sure la plaque
signalétique. Cet appareil ne peut être converti à d'autres gaz, sauf si une trousse de conversion est utilsée.
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could
result in serious injury, death, or property damage.
- Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use
any phone in your building.
• Leave the building immediately.
• Immediately call your gas supplier from a neigh-
bor's phone. Follow the gas supplier's instruc-
tions.
• If you cannot reach your gas supplier, call the
fire department.
- Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
Installation and Operation Instructions
DRT40 Multi-View Series Direct-Vent Gas Fireplaces
Models
PFS
DRT40STDEN
®
C
US
Report No. 14-171
Installateur : Laissez cette notice avec l'appareil.
Consommateur : Conservez cette notice pour
consultation ultérieure.
DRT40PFDEN
AVERTISSEMENT:
RISQUED'INDENDIE OU D'EXPLOSION
Le non-respect Des avertissements de sécurité
pourrait d'entraîner des blessures graves, la mort
ou des dommages matériels.
- Ne pas entreposer ni utilizer d'essence ni d'autres
vapeurs ou liquides inflammables dans le voisinage
de cet appareil ou de tout autre appareil.
- QUE FAIRE SI VOUS SENTEZ UNE ODEUR DE GAZ:
• Ne pas tenter d'allumer d'appareil.
• Ne touchez à aucan interrupteur. Ne pas vous servir
des téléphones se trouvant dans le bâtiment où
vous trouvez.
• Sortez immédiatement de bâtiment.
• Appelez immédiatement votre fournisseur de
gaz depuis un voisin. Suivez les instructions du
fournisseur.
• Si vous ne pouvez rejoindre le fournisseur de gaz,
appelez le service des incindies.
- L'installation et l'entretien doivent être assurés par
un installateur ou un service d'entretien qualifié
ou par le fournisseur de gaz.
DRT40CLDEN
DRT40CRDEN

Advertisement

Table of Contents
loading

Summary of Contents for Superior Fireplaces DRT40 Series

  • Page 1 Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplaces P/N 900299-00 Rev. F 02/2019 Models Ce manuel est disponible en francais, simplement DRT40CLDEN DRT40STDEN DRT40PFDEN DRT40CRDEN en faire la demande. Numéro de la pièce 900299-02. ® Report No. 14-171 P900299-00 INSTALLER: Leave this manual with the appliance.
  • Page 2: Safety And Your Fireplace

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 SAFETY AND YOUR FIREPLACE See attached color flyer for proper color representation DANGER HOT GLASS WILL CAUSE BURNS. DO NOT TOUCH GLASS UNTIL COOLED. NEVER ALLOW CHILDREN TO TOUCH GLASS.
  • Page 3 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 La sécurité et Safety and Your Seguridad y su votre foyer Fireplace chimenea All parts of your ¡Todas las partes de la Toutes les parties de votre IHP fireplace get chimenea IHP se ponen foyer IHP deviennent...
  • Page 4: Table Of Contents

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 TABLE OF CONTENTS PACKAGING GENERAL INFORMATION Safety and Your Fireplace ......Page 2 The assembled vented gas fireplace heater is WARNING Packaging ...........Page 4 packaged with: Introduction ..........Page 4 1 - one log set located within the firebox.
  • Page 5 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 WARNING WARNING WARNING Clothing or other flammable Improper installation or use of This product can expose you this appliance can cause serious material should not be placed to chemicals including Carbon injury or death from fire, burns, on or near the appliance.
  • Page 6: Commonwealth Of Massachusetts

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Electronic Models - Electronic models have a The appliance and its appliance main gas fixed rate gas valve. Input of electronic models valve must be disconnected from the gas is shown in Table 1.
  • Page 7: Cold Climate Insulation

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 COLD CLIMATE INSULATION For cold climate installations, seal all cracks around your appliance with noncombustible material and wherever cold air could enter the room. It is especially important to insulate outside chase cavity between studs and under floor on which appliance rests, if floor is above ground level.
  • Page 8: Vent Termination Clearances

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Be aware that this is a heat producing ap- Vertical Vent Termination Clearances pliance. Objects placed above the unit are Termination Heights For Vents exposed to elevated temperatures. Above Flat Or Sloped Roofs TERMINATION HEIGHTS FOR VENTS ABOVE FLAT OR SLOPED ROOFS...
  • Page 9 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 EXTERIOR HORIZONTAL VENT TERMINATION CLEARANCE REQUIREMENTS Inside Corner Outside Corner Recessed Location See Figure 4 Fixed Balcony with No Side Wall Balcony with Perpendicular Side Wall Openable Fixed Closed Closed...
  • Page 10: Appliance And Vent Clearances

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Hearth Extension MINIMUM CLEARANCES TO COMBUSTIBLES - A hearth extension is not required with this appliance. If a hearth exten- Appliance And Vent Clearances sion is used, do not block the lower control compartment door.
  • Page 11: Detailed Installation Steps

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 WARNING MINIMUM CLEARANCES Inches (millimeters) Back and Sides 1/2 (13) Failure to position the parts in 0 (0) from Spacers Or Dimples ** accordance with these diagrams Top Spacers 0 (0) or failure to use only parts...
  • Page 12: Typical Installation Sequence

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Step 2. (Page 16) Route gas supply line to Step 10. (Page 36) Install glass door assembly. appliance location. Pressure Relief Step 11. (Page 36) Adjust burner to ensure Plates Step 3.
  • Page 13: Fireplace And Framing Specifications

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 FIREPLACE FRAMING SPECIFICATIONS DRT40ST LibraST inches (millimeters) DRT40PF 11-3/8 inches (millimeters) LibraPF 11-3/8 (289) (See-Through) (See Through) Minimum Framing (Peninsula) Minimum Framing (Peninsula) 10-1/2 10-1/2 Stud Size is 2x4 Stud Size is 2x4 (267)
  • Page 14 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 FIREPLACE SPECIFICATIONS DRT40ST (See-Through) LibraST (See-Through) 50 3/8 (1280) 48 1/4 (1200) FINISHED WALL BRACKET 48 (1219) (Front and back edge of unit top) TOP VIEW NOTE: Unit has a factory-installed FRAMING NOTE - Unit has a factory-installed vent seal...
  • Page 15 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 FIREPLACE SPECIFICATIONS CONTINUED LibraCL (Corner-Left) DRT40CL (Corner-Left) FINISHED WALL BRACKET (Front and back edge of unit top) TOP VIEW (254) NOTE: Unit has a factory-installed vent NOTE - Unit has a factory-installed vent seal seal cap and vent cover plate (see cap and vent cover plate (see Figures 22 and...
  • Page 16: Step 2. Routing Gas Line

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Step 2. ROUTING GAS LINE Installing a gas supply line from the fuel supply to IMPORTANT: If propane is used, be aware that the appliance involves numerous considerations if tank size is too small (i.e.
  • Page 17: Step 4. Install The Venting System

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Step 4. INSTALL THE VENT SYSTEM Securing Screws Top Vent Vent Seal Cap General Information (OUTSIDE of Appli ance) These instructions should be used as a guideline and do not supersede Insulation local codes in any way.
  • Page 18: Vertical Termination Systems

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 VERTICAL TERMINATION SYSTEMS (ROOF) i t c i t c See Figure 24 and Figures 45 through 38 i t c on Pages 21 and 22 and their associated i t c Vertical Vent Tables which illustrate the various o i t...
  • Page 19 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Vertical (Offset) Installation B. Attach vent components to appliance - Se- C. Attach vent components to each other - Other vent sections may be added to the previously cure Vent SV4.5 Direct-Vent system compo- ®...
  • Page 20 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 F. Change vent direction to horizontal/inclined H. Frame roof opening - Identify location for run - At transition from or to a horizontal/in- vent at the roof. Cut and/or frame opening per clined run, install the SV4.5E45 and SV4.5E90 Roof Framing Chart and Figure 30.
  • Page 21: Vertical Vent Tables And Figures

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 VERTICAL VENT FIGURES/TABLES Table A NOTE: Secure Vent (rigid vent pipe) is shown ® in the figures; Secure Flex (flexible vent pipe) V Minimum ® H Maximum may also be used.
  • Page 22 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 VERTICAL VENT FIGURES / TABLES (CONTINUED) Table C Maximum H Maximum V Minimum feet (meter) feet (meter) feet (meter) Ceiling Firestop / (1.524) (0.610) (0.305) Spacer (SV4.5VF) (3.048) (1.219)
  • Page 23: Horizontal Termination System

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 HORIZONTAL (OUTSIDE WALL) Support TERMINATION SYSTEM Horizontal / Inclined Run Building Brackets Support Figures 39, and Figures 42 to 47 on Pages Framing SV4.5HT-2 Termination 23 to 27 and their associated Horizontal Vent SV4.5E90 Shown...
  • Page 24 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 J. Assemble vent run to exterior wall - If not To help minimize water infiltration it is previously measured, locate the center of the recommended that the Firestop/Spacer vent at the exterior wall.
  • Page 25: Horizontal Vent Tables And Figures

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 HORIZONTAL VENT FIGURES/TABLES Table F NOTE: Secure Vent components (rigid vent pipe and terminal) are ® V Minimum H Maximum shown in the figures; Secure Flex components (flexible vent pipe and ®...
  • Page 26 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 HORIZONTAL VENT FIGURES/TABLES (continued) Table G V Minimum Maximum H Maximum feet (meter) feet (meter) feet (meter) (1.524) (0.610) (0.305) (3.048) (1.219) (0.610) (4.572) (1.829) (0.914) Wall Firestop/ Spacer (SV4.5HF)
  • Page 27 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 HORIZONTAL VENT FIGURES/TABLES (continued) When using Secure Flex , use ® Example: If 20 feet total (H+H Wall Firestop / Spacer Firestop / Spacer SF4.5VF horizontal vent run is needed, then 4 (SV4.5HF) When using Secure Flex, use...
  • Page 28: Venting Using Flexible Vent Pipe

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 VERTICAL OR HORIZONTAL VENTING USING SECURE FLEX ® KITS AND COMPONENTS FLEX VENT NOTE: OUTER PIPE IS PULLED AWAY TO Secure Flex venting kits and components may SHOW THE DETAIL OF THE INNER PIPE ®...
  • Page 29: Step 5. Field Wiring

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Step 5. FIELD WIRING A. Electronic Wiring (See Figure 52) NOTE: The supplied 15 feet of brown 2-conductor wire has one end of each conductor NOTE: The electronic appliance must be con- connected to the gas valve circuit and the other CAUTION...
  • Page 30: Step 6. Optional Blower Kit Wiring

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Step 6. WIRING - OPTIONAL FORCED AIR BLOWER KIT Plug blower Green into this White receptacle FBK-100, FBK-200 and FBK-250 Kits e t i 120 VAC - Black (See Figure 52 for wiring) Black Junction Box...
  • Page 31: Step 7. Connecting Gas Line

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Step 7. CONNECTING GAS LINE Step 8. VERIFYING APPLIANCE OPERA- Secure all joints tightly using appropriate tools and sealing compounds (ensure propane TION Make gas line connections. All codes require a resistant compounds are used in propane shut-off valve mounted in the supply line.
  • Page 32 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Electronic Appliance Checkout To light the burner, turn ‘ON’ the unit mounted On/Off switch or the optional remote wall switch. Ensure the igniter lights the pilot. The pilot flame should engulf the flame rod as shown in Figure 55.
  • Page 33: Step 9. Installing Logs

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Step 9. INSTALL VERMICULITE, GLOWING EMBERS AND LOGS NOTE: It is important to ensure proper log placement per the manual when installing these units. Verify pilot flame is not obstructed. See Verifying Appliance Operation on Pages 31 and 32.
  • Page 34 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 DRT40PF, DRT40ST, DRT40CL AND DRT40CR LOG PLACEMENT Log Number Description Log, Corner Log, Rear/Left Log, Front/Left Log, Rear/Right Log, Front/Center Log, Center/Top Catalog Number for the entire log set: 55M04 Log (3) Lays Over Logs 1 And 2 STEP 3...
  • Page 35 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 DRT40PF, DRT40ST, DRT40CL AND DRT40CR LOG PLACEMENT (CONTINUED) Log Number Description Log, Corner Log, Rear/Left Log, Front/Left Log, Rear/Right Log, Front/Center Log, Center/Top Catalog Number for the entire log set: 55M04 Position The Round End Of Log (6) Position Small End Of Log (6) Against The Notch Of Log (4) Here.
  • Page 36: Step 10. Remove/Install Glass Door

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Step 10. REMOVING AND INSTALLING Only doors certified with the appliance Step 11. BURNER ADJUSTMENTS THE GLASS DOOR shall be used. Flame Appearance and sooting Seules des portes certifiées pour WARNING Proper flame appearance is a flame which is...
  • Page 37 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 NOTE: • If the barrier becomes dam- NOTICE: All DRT40 model fireplaces aged, the barrier shall be re- placed with the manufacturer’s include barriers to reduce the risk of barrier for this appliance.
  • Page 38: Step 12. Hood Installation

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Air Shutter Adjusting Combustible Wall This Area Must Remain Orifice Framing 3" (77 mm) Clear of Combustible Materials Combustible Finished Wall Materials 1" Min. (26 mm) Increase Shutter Header Opening In This...
  • Page 39: Step 13. Attaching Safety In Operation Warnings

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 STEP 13. ATTACHING SAFETY-IN-OPERATION WARNINGS It is the installers responsibility to ensure these warnings are properly affixed during installation. These warning labels are a critical step in informing consumers of safe operation of this appliance.
  • Page 40: Installation Accessories

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 INSTALLATION ACCESSORIES IMPORTANT NOTE: The installation accessories shown in this section are part of the safety agency listing for the product models represented in this manual. Listed Secure Vent Components Listed Secure Vent...
  • Page 41 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 INSTALLATION ACCESSORIES (continued) IMPORTANT NOTE: The installation accessories shown in this section are part of the safety agency listing for the product models represented in this manual. Listed Secure Flex Components ®...
  • Page 42: Gas Conversion Kits

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 GAS CONVERSION KITS c. Remove the modesty panel by pulling the bottom right corner of the modesty panel out slightly to disengage the snap-fit feature; lift the WARNING modesty panel by the tab on the panel's right end, pull the right end of the panel away from...
  • Page 43: Care And Operation

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 CARE AND OPERATIONS WARNINGS Burner Orifice Sizes (all models)* Inlet Pressure Test Port Natural Propane WARNING Model drill size (inches) drill size (inches) Children and adults should be Manifold #32 (0.116") 1.65mm (0.065")
  • Page 44: Gas Controls Access

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 A white film may develop on the glass front WARNING during the first few fires as part of the curing process. The glass should be kept clean during Failure to comply with the installation and operating instructions the first two weeks of use to prevent the film from baking on (making it very difficult to remove).
  • Page 45: Important Safety Information

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 IMPORTANT SAFETY INFORMATION Important Safety Informa- Información importante de L’information de sûreté tion seguridad importante 1. WARNING: Do not operate appliance 1. AVERTISSEMENT. Ne pas utiliser l’appareil 1.
  • Page 46: Attaching Safety In Operation Warnings

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 HOMEOWNER’S INSTRUCTIONS - ATTACHING SAFETY IN OPERATION WARNINGS ATTACHING SAFETY IN OPERATION WARNINGS APPOSITION DES MISES EN GARDE RELATIVES COLOCACIÓN DE ADVERTENCIAS DE SEGURIDAD À LA SÉCURITÉ D’UTILISATION EN OPERACIÓN Your fireplace has been furnished with safety instruction labels that are to be affixed to the...
  • Page 47: Maintenance

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 MAINTENANCE Wipe surface with a clean, dampened, soft Replacing Logs cloth. Follow with a dry, soft towel as desired. Take care not to scratch the glass surface. The If the logs become damaged by accident or (See Maintenance Schedule, Page 57) viewing glass should be cleaned periodically to...
  • Page 48: Front Glass Enclosure Panel, Removal And Installation

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 Front Glass Enclosure Panel, Removal Locate the two (2) latches at the top of the WARNING control compartment and disengage them from and Installation the door frame bottom vee-flange, pulling down Any safety screen, guard, or on their handles to open them.
  • Page 49: Install Vermiculite, Embers And Logs

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 INSTALL VERMICULITE, GLOWING EMBERS AND LOGS NOTE: It is important to ensure proper log placement per the manual when installing these units. Verify pilot flame is not obstructed. See Verifying Appliance Operation on Pages 31 and 32.
  • Page 50 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 DRT40PF, DRT40ST, DRT40CL AND DRT40CR LOG PLACEMENT Log Number Description Log, Corner Log, Rear/Left Log, Front/Left Log, Rear/Right Log, Front/Center Log, Center/Top Catalog Number for the entire log set: 55M04 Log (3) Lays Over Logs 1 And 2 STEP 3...
  • Page 51 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 DRT40PF, DRT40ST, DRT40CL AND DRT40CR LOG PLACEMENT (CONTINUED) Log Number Description Log, Corner Log, Rear/Left Log, Front/Left Log, Rear/Right Log, Front/Center Log, Center/Top Catalog Number for the entire log set: 55M04 Position The Round End Of Log (6) Against The Notch Of Log (4) Here.
  • Page 52: Burner Flame Appearance/Sooting

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 BURNER ADJUSTMENTS Air Shutter Adjustment Guidelines The following chart is provided to aid you in achieving the correct air shutter adjustment (QUALIFIED TECHNICIANS ONLY) • If there is smoke or soot present, first for your installation.
  • Page 53: Burner Flame Adjustments

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 BURNER FLAME ADJUSTMENTS Electronic Appliance Checkout Air Shutter Adjusting To light the burner, turn ‘ON’ the unit mounted WARNINGS On/Off switch or the optional remote wall switch. Orifice Ensure the igniter lights the pilot.
  • Page 54: Wiring Diagrams

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 WIRING DIAGRAMS ATTENTION: AU MOMENT DE L'ENTRETIEN DES COMMANDES, ÉTIQUETEZ TOUS LES FILS AVANT DE LES DÉBRANCHER. DES ERREURS DE CÁBLAGE Wiring diagrams are provided here for reference PEU-VENT ENTRAÎNER UN FONCTIONNEMENT INADÉQUAT ET DANGEREUX.
  • Page 55: Accessory Components

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 ACCESSORY COMPONENTS Cost Effective Solution • Simple On/Off operation Manual or up to 3 hr Countdown Timer modes Kit includes: Thermostatic or Manual modes Remote and Receiver •...
  • Page 56 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 ACCESSORY COMPONENTS CONTINUED Bag of Glowing Embers Bag of Volcanic Stone Touch-Up Paint Kit Replacement ember materials or volcanic stone are OFF/ON Wall Switch Kit Repair of minor scratches and discoloration of the available for use with these appliances.
  • Page 57: Maintenance Schedule

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 MAINTENANCE SCHEDULE Annually (Before the onset of the Burning Season) MAINTENANCE TASK ACCOMPLISHING PERSON PROCEDURE Inspecting/Cleaning Burner, Logs Qualified Service Technician Inspect valve and ensure it is properly operating. Check piping and Controls for leaks.
  • Page 58: Lighting Instructions - Electronic

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 LIGHTING INSTRUCTIONS, ELECTRONIC - ENGLISH FOR YOUR SAFETY READ BEFORE OPERATING WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.
  • Page 59 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 LIGHTING INSTRUCTIONS, ELECTRONIC - FRENCH POUR PLUS DE SÉCURITÉ LIRE AVANT DE METTRE EN MARCHE AVERTISSEMENT. Quiconque ne respecte pas à la lettre les instructions dans la présente notice risque de déclencher un incendie ou une explosion entraînant des dommages, des blessures ou la mort.
  • Page 60: Troubleshooting Guide - Electronic

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 TROUBLESHOOTING THE ELECTRONIC IGNITION SYSTEM NOTE: Before troubleshooting, be sure that the appliance main line gas shut-off valve, the gas control valve and the wall switch are in the “ON” position. Important: Valve system troubleshooting should only be accomplished by a qualified service technician.
  • Page 61: Replacement Parts List

    Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 REPLACEMENT PARTS LIST Description Part No. DRT40ST DRT40PF DRT40CL DRT40CR Hood (Black) 24" J7537 Hood (Black) 40" J7536 Glass Enclosure Assembly 24" H6336 Glass Enclosure Assembly 40" H8122 Log Set 55M04...
  • Page 62 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00, 02/2019 REPLACEMENT PARTS LIST CONTINUED GAS CONTROLS — HONEYWELL ELECTRONIC Natural DESCRIPTION Part No. Qty. Gas Valve - Honeywell 62L18 Pilot Assembly 62L14 Transformer 42J32 Igniter Assembly (Kit) 87L54 Orifice ST/PF 37L82...
  • Page 63: Warranty

    Innovative Hearth Products Superior Brand Gas Fireplaces, Stoves and Inserts ® 20 Year Limited Warranty THE WARRANTY Innovative Hearth Products ("IHP") 20 Year Limited Warranty warrants your Superior Brand gas fireplace, Stove or Insert ("Product") to be free from defects in materials ®...
  • Page 64 Innovative Hearth Products Installation and Operation Instructions DRT40 Multi-View Series Direct-Vent Gas Fireplace 900299-00 02/2019 SuperiorFireplaces.us.com Record the following important information about your fireplace: Fireplace model number Fireplace serial number Date fireplace was Installed Type of gas fireplace uses Dealer name Innovative Hearth Products reserves the right to make changes at any time, with- out notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.

This manual is also suitable for:

Drt40stdenDrt40pfdenDrt40cldenDrt40crden

Table of Contents