Changing The Settings Of Service Programs - Ricoh Priport JP1010 Operating Instructions Manual

SERVICE PROGRAM MODE
Changing The Settings Of Service
Programs
A
After entering the desired SP No., press the { { { { q
3
The value or mode set at the factory will be displayed at the end of the second
line on the guidance display.
Note
If you designate the wrong SP No., press the {Clear Modes} key. Then, re-
enter the desired SP No.
B
Enter the desired value or mode with the { { { { Number} } } } keys.
C
Press the { { { { q
54
TSLS01JE
TSLS011E
q } } } } key to store the desired value or mode. q q
TSLS01JE
q } } } } key.
q q