Table of Contents
Advertisement
SP No. Mode
21
PRINTS/MASTER
COST
25
CLEAR 2 IN 1
29
PHT BCKGRND COR-
RECT
40
ORIGINAL
Changing The Settings Of Service Programs
Function
The optional key counter usually counts the
number of prints made regardless of the number
of masters used. For accounting purposes, it is
possible for the key counter to be incremented by
a value between 0 and 50 whenever a new master
is used.
Example: The key counter is adjusted to increase
by 20 for each master fed. If 100 copies have been
made and the master is replaced, the key counter
will increase by 120.
Note
Default: 0
Adjustment value: 0 – 50
By default, when master making is finished in
Combine Copies mode, this mode stays selected
for the next master making.
If you want master making turned off, select "1".
Note
Default: 0
Adjustable value: 0: No 1: Yes
Even if you select "1" in this mode, Combine
Copies mode is not cleared when the next orig-
inal are set in the optional document feeder.
For details about Combine Copies, see ⇒ P.32
"Combine Copies—Combining 2 Originals Into
One Print".
When you make prints in Photo or Letter/Photo
mode, the background of the prints might become
dirty. You can prevent this using this function.
Note
Default: 0
Adjustment value: 0: No 1: Yes
Specifies the image mode at power on.
Note
Default: 0
Adjustment value:
• 0: Letter mode
• 1: Letter/Photo mode
• 2: Photo mode
3
57
Advertisement
Table of Contents
