Table of Contents
Advertisement
WHAT TO DO IF SOMETHING GOES WRONG
R CAUTION:
• Be careful not to cut yourself on any sharp edges when you reach
Note
To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
If misfeeds occur repeatedly, contact your service representative.
When the open cover/unit indicator (M
Monitor
Guidance Display and Action
M
CLOSE THE COVER
5
• Close the original table unit.
• Close the front door.
CLOSE THE PLOTTER COVER
• Close the right side cover and
CLOSE THE ADF COVER
• Close the optional ADF unit.
SET THE DRUM COMPLETELY
When the supply/exchange indicators blink
Monitor
Guidance Display and Action
B
LOAD MORE PAPER
j
LOAD NEW INK CARTRIDGE
C
LOAD NEW MASTER ROLL
k
EMPTY MASTER EJECT BOX
• Remove the used master.
SET THE MASTER EJECT BOX
When other indicators blink
Monitor
Guidance Display and Action
u
SET THE KEY COUNTER
80
inside the machine to remove misfed sheets of paper or masters.
the plotter cover.
M ) blinks
M
M
Page
⇒ P.95 "When The Open Cover/Unit In-
dicator (M) Blinks".
⇒ P.95 "When The Open Cover/Unit In-
dicator (M) Blinks".
Page
⇒ P.69 "Loading Paper On The Paper
Feed Table".
⇒ P.71 "When The Add Ink Indicator (j)
Blinks".
⇒ P.74 "Master Roll Replacement".
⇒ P.97 "When The Master Eject Indica-
tor (k) Blinks".
Page
⇒ P.98 "When Other Indicators Blink".
Advertisement
Table of Contents
