Ricoh Priport JP1010 Operating Instructions Manual page 56

OPERATION
F
Press the { { { { Start} } } } key.
1
G
The beeper sounds after the first
original is on the master. Set the
second original face down.
H
Press the { { { { Start} } } } key.
I
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see ⇒ P.8 "Shift-
ing The Print Image Position For-
ward Or Backward") or the side
table fine adjusting dial (see ⇒
P.8 "Shifting The Print Image Po-
sition To The Right Or Left").
34
J
Enter the number of prints with
the { { { { Number} } } } keys.
TSLS012E
K
Make your prints.
TSLS012E
TSLS011E