Adjusting The Print Image Density; Before Making A Master; After Making A Master - Ricoh Priport JP1010 Operating Instructions Manual

OPERATION

Adjusting The Print Image Density

You can adjust the print image densi-
ty to suit your needs. There are two
1
ways:

Before Making A Master

Adjust the image density using the
{Image Density} key.

After Making A Master

Adjust the image density using the
{W} or {V} key.
Before Making A Master
A
Use the { { { { Image Density} } } } key before
pressing the { { { { Start} } } } key.
After Making A Master
A
Press the { { { { W W W W } } } } or { { { { V V V V } } } } key. To in-
crease the speed, press the { { { { V V V V } } } }
10
key. To reduce the speed, press
the { { { { W W W W } } } } key.
Note
The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
TSLS016E
TSLS017E