Label Width - Brady BradyPrinter S3700 User Manual

Label Width

You can adjust the width of the installed media to accommodate up to 4 labels printed in the space of
the adjusted width. Adjusting the width automatically changes the size of the font and the margins
(boundaries). In this function, label width also addresses the height of the label, measured from top to
bottom. For instance, if using 4-inch tape, when you select 2 Up, two labels would be 'stacked' and
printed on the tape, each taking up 2 inches. If you selected 3 up, three labels would be 'stacked' and
printed on the tape, each taking up approximately 1.333 inches. The fourth label would be printed
trailing the first label.
Match media size
To adjust the width:
1. Touch Menu.
2. Under Label, touch Size & Orientation.
3. Under Label Width, touch Set Label Width.
4. In the Set Label Width dialog box, with the Width option box selected, touch the desired width.
Note: Observe the preview panel on the right side of the screen to view how the labels will print.
You can also set a custom width. Setting a custom width disables the 2- 3- and 4-Up function. To set a
custom width:
5. Touch Set Custom Width option box.
6. In the Set Custom Width data field, enter the desired width.
7. When finished, touch OK.
BradyPrinter S3700 User Manual
Label width - 2 UP
Figure 1 • Stacking labels using 2-, 3-, or 4-Up label width
Label width - 3 UP Label width - 4 UP
Label Types
Label Width
62