Label Types; Label Fixed Length - Brady BradyPrinter S3700 User Manual

6 Label Types

The following features apply to the overall label in general, not object elements.

Label Fixed Length

If using continuous media, the label length adjusts to fit the data that you add to the label (variable
label length). This is known as autosizing and is the system default when using continuous media.
However, to control the label length of the media, you can set fixed length.
Note: The label size for die-cut media is already set and cannot be adjusted.
To create a fixed-length label:
1. Touch Menu.
2. Under Label, touch Size & Orientation.
Note: You can also access the Label Size & Orientation dialog box by touching the Label Size in
3. In the Label Size & Orientation dialog box, touch Fixed Length option box.
4. In the Fixed Length data field, enter the desired label length.
Note: For single-color printing, the minimum supported length (after cutting) is 2 in. (51 mm). The
5. Touch OK.
The Status Bar and the rulers indicates the new label length.
To return to Auto-Sizing:
1. Touch Menu.
2. Under Label, touch Size & Orientation.
3. In the Label Size & Orientation dialog box, touch Autosize to Fit Data option box.
4. Touch OK.
BradyPrinter S3700 User Manual
Size &
Orientation
the text in the Status bar at the bottom of the screen.
maximum supported length is 16 ft (5 m). For multi-paneled ribbon, the label length is limited
to 15 in. (381 mm). If doing multi-colored printing using mono-colored ribbons (i.e., swapping
out the different colored ribbons), the maximum length is 48 in. (1219 mm). If printing with
paneled multi-colored ribbons installed, you are limited by the length of the panel.
Portrait Landscape
60