Printing; Printing Labels Created On The Printer - Brady BradyPrinter S3700 User Manual

5 Printing

The Print function prints the file that is currently in the Editor. During printing, the print status is
displayed and the Editor is unavailable. When printing is complete, you are returned to the Editor.
As you print your labels, keep the following in mind:
• The printer cuts between labels or at the end of the job, according to the selected cut settings.
• If there are no labels or ribbon installed, printing does not start and you will be prompted to install the
labels or ribbon.
• If you open the ribbon cover during the print operation, printing stops and a message displays
prompting you to close the cover. The print job is canceled. To print the labels, you must restart the
print job.

Printing Labels Created on the Printer

Use this procedure to print labels created on the printer.
1. With a defined label in the Editor, touch Print.
2. In the Print dialog box select the print options:
•
•
•
•
•
3. When ready to print, touch Start Print.
While the data is printing, the Print Status screen displays the progress. Once the data has printed,
you are returned to the Editor.
Whether the labels are cut between labels or at the end of the job depends on the default parameters.
(See "Printing Defaults" on page 10
BradyPrinter S3700 User Manual
Copies: (Visible only for a label that does not contain serial data. See
Mirror: Print labels suitable for reading in a mirror or through the back of the label. The Mirror
setting is not retained for the next print job. The Mirror setting must be reselected each time you
want to print mirror image labels. (see
Preview: (see "Print Preview" on page
Print energy: (accessed from the Advanced Settings button, (see
page 55)
Adjust Offset: (accessed from the Advanced Settings button, (see
page 55)
"Mirror Print" on page
54)
for information on setting defaults.)
"Copies" on page
55)
"Advanced Settings" on
"Advanced Settings" on
57)
53