Label Width - Brady BBP 31 User Manual

Set Label Attributes

Label Width

Label Width
Match media size
3-6
You can adjust the width of the installed media to accommodate up to 4 labels
printed in the space of the adjusted width. Adjusting the width automatically
changes the size of the font and the margins (boundaries). In this function, label
width also addresses the height of the label, measured from top to bottom. For
instance, if using 4-inch tape, when you select 2 Up, two labels would be 'stacked'
and printed on the tape, each taking up 2 inches. If you selected 3 up, three labels
would be 'stacked' and printed on the tape, each taking up approximately 1.333
inches. The fourth label would be printed trailing the first label.
Label width - 2 UP
Figure 4. Stacking labels using 2-, 3-, or 4-Up label width
To adjust the width:
1. Touch Menu
2. Under Label, touch Size & Orientation
3. Under Label Width, touch Set Label Width
Label width - 3 UP
.
.
®
BBP 31 Sign & Label Printer User's Manual
Label width - 4 UP
.