Brady BradyPrinter S3700 User Manual page 83

5. Touch the desired graphic in the list.
6. When ready, touch Finish.
Setting RTK Preferences
From the Right-to-Know Preferences menu, you can choose default label settings for size and format.
You can also add or delete hazards and/or organ types. Any defaults set here will stay in effect until
you change them.
If you use a standard or consistent Right-to-Know label format, set these formatting preferences as
defaults. Setting preferences simplifies creating RTK labels.
To set RTK label defaults:
1. With the RTK label in the Editor, touch Menu, then under System, touch Setup.
OR, when creating a new RTK label:
On the Right-to-Know Format screen, touch Preferences.
Format
To set up a default label format:
1. In the Right-to-Know Preferences dialog box, touch Format.
2. On the Right-to-Know Format screen, use the up/down arrows in the scroll bar to view more
format options.
3. In the list, touch the desired format, then touch OK.
Size
To choose a default label size:
1. In the Right-to-Know Preferences dialog box, touch Size.
2. On the Select default size screen, in the list presented, touch the desired label size,
3. Touch OK.
Note: The available label sizes are determined by the format type you have selected.
Hazard Types
To add a hazard type:
1. In the Right-to-Know Preferences dialog box, touch Hazards.
2. On the Add or delete hazards dialog box, enter the new hazard in the data field.
3. Touch Add.
To delete a hazard type:
4. In the Add or delete hazards list, touch the hazard you want to delete, then touch Delete.
BradyPrinter S3700 User Manual
Label Types
Application Label Types
74