Brady BradyPrinter S3700 User Manual page 36

Center on Label
The Center on Label buttons center the selected element vertically or horizontally to the boundaries
(margins) of the label, not to other elements.
To center an element on a label:
1. Touch the element to be centered.
A bounding box will appear around the element letting you know it is selected.
2. Touch the Right Arrow button under More Options until the Center on Label buttons are
displayed.
3. Touch the desired (vertical or horizontal) Center on Label button.
Align to Edge
The Align to Label Edge buttons align the selected element to the left, right, top or bottom edge of the
label. Only the alignment options relevant to the element are available. For instance, if an element is
already aligned to the top of the label, the top alignment button is grayed out.
To align an element to the label:
1. Touch the element to align.
2. Touch the Right Arrow button under More Options until the Align to Label Edge buttons are
displayed.
3. Touch the desired available Align to Label Edge buttons.
Exact Size & Position
The alignment buttons place an element at an approximate location on the label. For precise
placement of an element on a label, use the Exact Size & Position button to specify the exact location.
The measurements are recorded in inches or millimeters, depending on what you have set as the
default unit of measure.
To precisely place an element on the label:
1. Touch the element to be aligned.
2. Touch the Right Arrow button under More Options until the Exact Size & Position button
displays.
3. Touch the Exact Size & Position button.
4. Touch the appropriate data fields and enter the desired size or position.
5. When finished, touch OK.
Note: If the values entered result in the object being positioned outside the printable area, the
system resizes and repositions the object to fit on the label.
BradyPrinter S3700 User Manual
Formatting Labels
Elements
27