Brady BradyPrinter S3700 User Manual page 92

8. On the Legend screen, in the Chemical name: field, enter the name of the substance that
flows through the pipe or select from the displayed list.
Note: Whether you entered the substance name or selected it from the list, you can add additional
information to the chemical name field, such as special characters.
9. To enter special characters, touch the Chemical name: field where the special characters
should be placed.
10. Touch Special Characters, then enter the character(s). See
page 36
11. Touch the Comment: field and enter additional comments to display on the pipe marker label,
if desired.
12. When ready, touch Next.
Note: You can add up to four graphics to the pipe marker label. The available graphics are divided
into categories.
To change to another category:
13. Touch Change Category.
14. Under Categories, touch the up/down arrows to view more categories in the list.
15. Touch the desired category to select it, then touch OK.
16. On the Graphics screen, touch the left or right double arrows to scroll through the list of
available graphics.
17. Touch the desired graphic in the list.
18. Repeat the above two steps to add another graphic.
19. When ready, touch Next.
Note: Arrows can be added to a pipe marker label according to the standards defined by the country
or region.
To add an arrow:
20. Touch the option box designating where you want the arrows to display - Before Legend
and/or After Legend. (You can select both or none.)
21. Touch Next.
22. To cut out the HSID Pipe Marker label, go to the Cut Out Label screen and select No Cut,
Around Label or Around Arrows.
23. When ready, touch Finish.
BradyPrinter S3700 User Manual
for more detail.
Label Types
Application Label Types
"Adding Special Characters" on
83