Brady BradyPrinter S3700 User Manual page 85

4. In the Pipe contents dialog box, choose the type of material that flows through the pipe.
5. Touch the up/down arrows to view more options in the list.
6. When found, touch the desired contents option to select it, then touch Next.
Note: The material selected determines the pipe marker colors based on the selected color norm
in the Pipe Marker setup menu.
7. On the Legend screen, touch Legend line 1: data field, and enter the text to display on the
label.
Note: You can add additional data in the Legend line 2: and Supplemental data: fields. Be aware,
however, that entering more than one line of text may reduce the font size to a point where
it no longer meets the pipe marking standard for the selected color norm.
8. When ready, touch Next.
Note: You can add up to four graphics to the pipe marker label. The available graphics are divided
into categories.
To change to another category:
9. Touch Change Category.
10. Under Categories, touch the up/down arrows to view more categories in the list.
11. Touch the desired category to select it, then touch OK.
12. On the Graphics screen, touch the left or right double arrows to scroll through the list of
available graphics.
13. Touch the desired graphic in the list.
14. Repeat the above two steps to add another graphic.
15. When ready, touch Next.
Note: Arrows can be added to a pipe marker label according to the standards defined by the country
or region.
On the Arrows screen:
16. Touch the option box designating where you want the arrows to display - Before Legend
and/or After Legend. (You can select both or none.)
17. Touch the option box indicating the direction in which the material flows through the pipe.
18. When ready, touch Finish.
If too many characters per line are used, a message displays prompting you to edit the text or lengthen
the pipe marker. Likewise, if the length of all elements together exceeds the recommended length, you
are prompted to edit the data or lengthen the pipe marker.
19. To edit the information, touch Edit data, then repeat Steps 6 through 18 above.
20. To have the printer scale the elements to fit on the label, touch Lengthen Pipe Marker.
The printer scales the elements and lengthens the label to accommodate all data.
BradyPrinter S3700 User Manual
Label Types
Application Label Types
76