Xy Cutter Blade Height; Using The Xy Cutter - Brady BradyPrinter S3700 User Manual

You create cut out objects by adding them to a label, the same way you create and add print objects.
However, once you choose the Cut out object option, your other choices are limited to objects that may
be cut out.
Not all tape supplies are appropriate for cutting. If the cutter cannot use the tape installed in the printer,
the Cut out option in the control panel will be grayed out.

XY Cutter Blade Height

Different label supply requires different blade heights. When you touch the Print button, a message
displays indicating if the media installed is able to be cut. If it is, another message displays indicating
the blade height to use (height 1 or 2). To adjust the blade height:
1. Open the printer cover.
2. Looking into the printer from the side of the cover latch, the yellow stylus used for adjusting the
blade height is located on the right side of the printer.
3. Grasp the tab extending from the stylus and turn the stylus to the left for blade height #2, or to
the right for blade height #1 (as depicted on the label attached to the stylus mechanism).

Using the XY Cutter

With the label to cut out in the Editor:
1. On the Control Panel, in More Options, touch the Left arrow.
2. Under Print/Cut, touch Cut Shape option box to select.
3. Touch Print.
4. Touch Advanced Settings.
5. Touch XY Cut Settings.
To increase or decrease the depth of the cut line:
6. Touch Adjust XY Cut Depth.
7. Touch the gradient box for the desired increase or reduction in depth, then touch OK.
BradyPrinter S3700 User Manual
Printing
XY Cutting
58