Power Save Mode; Units Of Measure; Font - Brady BradyPrinter S3700 User Manual

Power Save Mode

To conserve energy, the printer will go into power save mode after a period of inactivity. Any data on
the screen is retained and available when the printer is reawakened.
If a label is defined when the system goes into power save mode and the label supply is changed to a
supply where the label no longer fits, you will be prompted to make the data fit or save the existing
label before continuing. If you choose the option to make the data fit, the system may move or resize
the objects so they fit on the new label size.
The default inactive time is 5 minutes, which you could leave as is or customize up to 1 hour or never.
1. On the touchscreen, touch Menu.
2. Under System, touch Setup.
3. Touch Clock Settings.
4. Set the amount of inactive time before the printer goes into sleep mode.

Units of Measure

Set the unit of measure to inches or millimeters.
Once configured, you do not have to indicate "inches" or "millimeters" (or their globally accepted
abbreviations or marks) when entering numbers in data fields. Likewise, in any scale or range of
measurement field (as found under Label Type), the range of measurements will automatically
configure to the units selected in the Menu function.
1. On the touchscreen, touch Menu.
2. Under System, touch Setup.
3. Touch Localization.
4. Touch the box next to the desired unit of measure.
A checkmark will appear.
5. Touch OK to save the changes.

Font

If you know most of your labels will use a specific font, size or justification (left aligned or centered), set
these options as defaults. If your defaults will not work with a particular label supply, the printer will
automatically change them to what is compatible with the label supply being used. While you can
always change the attributes for a specific label or label type, when the label supply and/or application
label type is reloaded, it will return to these settings.
1. On the touchscreen, touch Menu.
2. Under System, touch Setup.
3. Touch Text Defaults.
4. Set your font, text units (font size) and justification.
Note: Justification refers to the alignment of text between the left and right margin of the label.
5. Touch OK to save the changes.
BradyPrinter S3700 User Manual
Setup
Printer Settings
8