Brady BradyPrinter S3700 User Manual page 112

6. Remove the cut pad screws.
8. Use a moistened wipe from the cleaning kit to clean the cut pad.
To reinstall the cut pad and upper guide:
Tuck the left edge of the cut pad underneath
9.
the cutter module carriage, then swing the
right edge back into place, lining up the holes
for the screws.
BradyPrinter S3700 User Manual
Gently pull up on the tab to loosen the cut
7.
pad, then swing the cut pad out from
underneath the XY cutter carriage to remove it.
Re-insert the two screws into the aligned
10.
holes and tighten.
Maintenance
Cleaning the Printer
103