Monitoring Ink Levels; Output Or Cut Mode; Cutter Options - Brady BradyJet J2000 User Manual

Monitoring Ink Levels

Ink levels can be monitored at any time by using the Ink Tab (first tab) found in the Status Monitor.
Immediately after printing starts the Status Monitor will open and display the ink levels.
The print status will also be displayed on the top bar. If a print job is currently printing you may click the
cancel button on this screen to stop it.
Note: Ink cartridge levels are estimates.

Output or Cut Mode

Use the output / cut mode to adjust how the printer presents labels after they are printed or if / when
they are cut after printing. To make adjustments, open the Status Monitor.
1. Connect the printer to the computer via USB and turn on the power.
The output / cut mode setting is stored on the printer main board so you will not be able to
access it unless the printer is turned on and properly communicating with the computer.
2. Go to Start >Programs >Brady>J2000 Status Monitor.
3. Click on the Alignment Tab (third tab from top).
4. Click on the output / cut mode button.

Cutter Options

Do not cut The label stays at the same position after printing.
Cut after no activity This setting will cut at the end of a print job if the printer does not receive another
print job within one second of the last print job in the queue. You can use this feature to cut at the end
of a multi-copy job, multi-page job or multiple individual jobs in the queue.
BradyJet J2000 Color Label Printer
Using System Tools
Output or Cut Mode
14