Replacing The Cutter Blade Cover - Brady BMP 61 User Manual

Replacing the Cutter Blade Cover

If the printer is accidentally dropped, the cutter blade cover may come loose or fall out. If the blade
cover is not dented or damaged, re-insert the blade cover into the printer.
Side of cutter housing
To re-insert the cutter blade cover:
1. Grasp the blade cover from the top with the cut-out portion of the blade facing the display
screen (away from the label supply well).
2. Pull the black flap forward, then insert the blade tight up against the black flap with the metal
tabs fitting over the outside of the cutter housing.
®
BMP 61 User's Manual
Maintenance and Troubleshooting
Side of cutter housing
Back flap
Cutter blade cover
Metal tabs
Replacing the Cutter Blade Cover
84