Clean Auto-Cutter Blade - Brady BBP 33 User Manual

Clean Auto-Cutter Blade

®
BBP 33 Sign & Label Printer User's Manual
Note: When cleaning the cutter, you should also clean the media and cutter
sensors (see "Clean Sensors" on page 4-7).
Materials Required
• Isopropyl Alcohol
• Cleaning Kit (Cat # B31-CCT), includes foam swabs, adhesive scraping tool,
plastic bottle (not available in all regions)
To clean the cutter:
1. Remove power and media from the printer.
2. Squeeze the two yellow cutter tabs [2a] to release the cutter. The cutter
mechanism and exit chute [2b] will slide down behind the ribbon cover.
3. Fill the plastic bottle from the cleaning kit with isopropyl alcohol.
Printer Maintenance
Cleaning the Printer
2a
2b
-
4 5