Automatically Adjusting The Date And Time Settings; Recording The Camera Route - Ricoh WG-6 Operating Manual

Memo ---------------------------------------------------------------------------------------------------------
• The standard of GPS information displayed on the monitor can be set in [GPS Disp Mode] of the D
menu.
LAT/LON
UTM
MGRS
• The details of the location information recorded in images can be checked in "Detailed information
display" in the playback mode (p.18).
• Set [GPS Lock] to [On] in the D menu to enable the function to protect the acquired GPS informa-
tion. The GPS information is protected when d is pressed on the shooting screen. The information is
unprotected when d is pressed again.
5

Automatically Adjusting the Date and Time Settings

The camera date and time settings can be adjusted based on the GPS infor-
mation by setting [GPS Time Adjustment] to [On] in the D menu.

Recording the Camera Route

You can record the camera route using the GPS information.
1
Select [GPS Log] in the D menu, and press d.
The [GPS Log] screen appears.
2
Select [Record log], and press e.
88
Displays the latitude and longitude.
Displays the Universal Transverse Mercator (UTM) coordinates.
Displays the Military Grid Reference System (MGRS) coordinates used as mil-
itary information.
GPS Log
Record log
Save log data
Discard log data
OK