Controlling The Image Finishing Tone; Custom Image - Ricoh PENTAX K-3 II Operating Manual

Controlling the Image Finishing
Tone
When you want to take pictures with a slightly different style,
you can set the desired picture style before shooting.
Try out the various settings, and find your best picture style.

Custom Image

3
1
Press D in standby mode.
The Custom Image setting screen appears.
2
Select an image finishing
tone.
Bright (default setting)
Natural
Portrait
Landscape
Vibrant
Radiant
Available operations when shooting with the viewfinder
Main switch to U
H
Proceed to Step 6 if you do not need to change the
parameters.
3
Press G.
The parameter setting screen appears.
58
Bright Bright
Parameter Adj. Parameter Adj.
Cancel Cancel Check Check
Muted
Bleach Bypass
Reversal Film
Monochrome
Cross Processing
Uses Digital Preview to preview
the background image with the
selected setting applied.
Saves the preview image (only
when the image can be saved).
4
Set the parameters.
Available operations
Selects a parameter.
AB
Adjusts the value.
CD
Switches between [Contrast], [Highlight
Q
Adjustment], and [Shadow Adjustment].
Switches between [Sharpness], [Fine
R
Sharpness], and [Extra Sharpness].
(Not available in C mode).
Resets the adjustment value to the default
M
OK OK
setting.
5
Press E.
The screen of Step 2 reappears.
6
Press E.
The camera returns to standby mode.
u Caution
• This function is not available when in T mode.
• The Digital Preview operation in Step 2 cannot be performed
when the drive mode is set to [Multi-exposure], [Interval
Shooting], or [Interval Composite].
Saturation Saturation
Check Check
Cancel Cancel OK OK