Mirror Lock-Up Shooting - Ricoh PENTAX KF Operating Manual

5
Press E.
The screen of Step 1 reappears.
6
Set the number of shots and bracket value.
Available operations
Sets the number of shots.
Q
Changes the bracket value.
R
Adjusts the exposure
JR
compensation value.
Resets the adjustment value to the
M
default setting.
7
Press E.
The camera returns to standby mode.
8
Shoot.
After pictures are taken, the camera returns to standby
mode.
t Memo
• The bracket value can be set in increments of 1/3 EV steps or
1/2 EV steps according to the [1 EV Steps] setting of the E1
menu.
• The following settings for Bracketing can be set in the E2
menu.
10 Bracketing Order
11 One-Push Bracketing
Changes the shooting order of
pictures.
Takes all pictures with one
release of the shutter.

Mirror Lock-up Shooting

1
Select c on the Drive
Mode screen and press B.
2
Use CD to select c or d.
Mirror Lock-up Shooting
c
d Mirror Lock-up Shooting + Remote Control
3
Press E.
The camera returns to standby mode.
4
Press 0 halfway, and then fully.
The mirror pops up and the AE Lock function is activated.
5
Press 0 fully again.
The picture is taken and then the mirror returns to its
original position.
t Memo
• The mirror automatically returns to its original position if 1
minute elapses after the mirror pops up.
u Caution
• While this function is used, [Shake Reduction] of the A4
menu is fixed to [Off].
Mirror Lock-up Shooting Mirror Lock-up Shooting
Cancel Cancel OK OK
3
69