Table of Contents
Advertisement
Getting Your Camera Ready for Use
Attaching the Strap
1
Pass the end of the strap
through the strap lug and
secure it on the inside of
the clasp.
2
Attach the other end in the same manner.
Attaching a Lens
1
Make sure that the camera is turned off.
2
Remove the body mount
cover (1) and lens mount
cover (2).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3
Align the lens mount
indexes (red dots: 3) on
the camera and the lens,
and secure by turning the
lens clockwise until it
clicks.
To remove the lens
Attach the lens cap, and then turn
the lens counterclockwise while
pressing the lens unlock button
(4).
u Caution
• When a retractable lens is attached and is not extended, you
cannot take pictures or use some functions. If the lens is
retracted during shooting, the camera stops working. Refer to
Step 2 of "Shooting with the Viewfinder" (p.32) for details.
3
3
4
27
Advertisement
Table of Contents
