Operating Controls - Ricoh Pentax Q-S1 Start Manual

Operating Controls

1
2
6
7
4
1 E-dial (V)
Sets the shutter speed, aperture, and exposure
compensation values. (p.23)
You can change the camera settings when the control panel
3
is displayed. (p.8)
You can change the menu tabs when a menu screen is
displayed. (p.9)
In playback mode, use this to magnify an image or display
multiple images at the same time.
2 Mode dial
Changes the capture mode. (p.20)
4
3 Shutter release button
Press to capture images. (p.20)
In playback mode, press halfway to switch to capture mode.
5
4 Quick dial
You can easily retrieve functions such as those assigned
with Smart Effect. (p.24)
5 Lens unlock button
8
Press to detach the lens on the camera. (p.16)
6 Playback button (3)
Switches to playback mode. (p.25) Press the button again
9
to switch to capture mode.
7 Flash pop-up switch
0
Slide to pop up the built-in flash.
8 Power switch
a
Press to turn the camera on and off.
b
9 EV compensation button (J)
Press to change the exposure compensation and aperture
c
values. (p.23)
d
In playback mode, the JPEG data remaining in the buffer
memory is saved in RAW format.