7.3.3 To rotate the switch box
7.3.4 To close the outdoor unit
EWAA004~008D + EWYA004~008D
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P688013-1B – 2022.09
During the installation, you will need access to the inside of the outdoor unit. To
have easier front access, rotate the switch box out of the unit as follows:
Prerequisite: The front plate has been removed.
1 Push down the clip of the switch box holder.
1
2 Rotate the switch box out of the unit.
2
3 Rotate the switch box back until it engages properly in the switch box holder.
NOTICE
Speed nut. Make sure the speed nut for the top screw is correctly attached to the
service cover.
3
4
7
Unit installation
|
Installer reference guide
57