To Lower The Switch Box Of The Indoor Unit And Remove The Top Cover - Daikin ETSXB16E Installer's Reference Manual

7 | Unit installation

7.2.7 To lower the switch box of the indoor unit and remove the top cover

Installer reference guide
74
Open
1 Remove the user interface panel. Open the hinges at the top and slide the
interface panel downwards.
2 Remove the switch box cover.
NOTICE
Do NOT damage or remove the foam sealing of the switch box.
3 Disconnect the ground connection from the top cover of the switch box.
During the installation, you will need access to the inside of the indoor unit. To
have easier front access, lower the switch box of the unit as follows:
Prerequisite: The user interface panel has been removed.
1 Loosen the screws.
2 Lift up the switch box.
1
2
1×
EPRA14~18D + ETSH/X(B)16P30+50E
Daikin Altherma 3 H HT ECH₂O
4P679467-1C – 2023.07