Daikin EWYA004D2V3P Installer's Reference Manual page 227

Field settings table
Breadcrumb Setting name
9.1.7 [1-06] Low ambient temp. for LWT main zone cooling WD curve.
9.1.7 [1-07] High ambient temp. for LWT main zone cooling WD curve.
9.1.7 [1-08]
Leaving water value for low ambient temp. for LWT main zone
cooling WD curve.
9.1.7 [1-09] Leaving water value for high ambient temp. for LWT main zone
cooling WD curve.
└─ Additional zone
9.1.8.1 [2-0D] Emitter type
9.1.8.3 Setpoint mode
9.1.8.4 Schedule
9.1.9 [0-00] Leaving water value for high ambient temp. for LWT add zone
heating WD curve.
9.1.9 [0-01] Leaving water value for low ambient temp. for LWT add zone
heating WD curve.
9.1.9 [0-02] High ambient temp. for LWT add zone heating WD curve.
9.1.9 [0-03] Low ambient temp. for LWT add zone heating WD curve.
9.1.A [0-04]
Leaving water value for high ambient temp. for LWT add zone
cooling WD curve.
9.1.A [0-05] Leaving water value for low ambient temp. for LWT add zone
cooling WD curve.
9.1.A [0-06] High ambient temp. for LWT add zone cooling WD curve.
9.1.A [0-07] Low ambient temp. for LWT add zone cooling WD curve.
└─ Domestic hot water
9.2.1 [E-05] Domestic hot water
[E-06]
[E-07]
9.2.2 [D-02] DHW pump
9.2.4 [D-07] Solar
└─ Back up heater
9.3.1 [E-03] BUH type
9.3.2 [5-0D] Voltage
9.3.3 [4-0A] Configuration
9.3.4 [6-03] Capacity step 1
9.3.5 [6-04] Additional capacity step 2
9.3.6 [5-00] Equilibrium: Deactivate backup heater (or external backup heat source in case of a bivalent system) above the equilibrium temperature for space heating?
9.3.7 [5-01] Equilibrium temperature
9.3.8 [4-00] Operation
└─ Booster heater
9.4.1 [6-02] Capacity
(*1) *EWYA_(*2) *EWAA
Range, step
Default value
R/W 10~25°C, step: 1°C
20°C
R/W
25~43°C, step: 1°C
35°C
R/W [9-03]~[9-02]°C, step: 1°C
[2-0C]=0
22°C
[2-0C]=1
15°C
[2-0C]=2
22°C
R/W [9-03]~[9-02]°C, step: 1°C
[2-0C]=0
18°C
[2-0C]=1
7°C
[2-0C]=2
18°C
R/W 0: Underfloor heating
1: Fancoil unit
2: Radiator
R/W 0: Fixed
1: WD heating, fixed cooling
2: Weather dependent
R/W 0: No
1: Yes
R/W
[9-05]~min(45,[9-06])°C, step: 1°C
[2-0C]=0
25°C
[2-0C]=1
35°C
[2-0C]=2
40°C
R/W [9-05]~[9-06]°C, step: 1°C
[2-0C]=0
35°C
[2-0C]=1
45°C
[2-0C]=2
60°C
R/W 10~25°C, step: 1°C
15°C
R/W -40~5°C, step: 1°C
-10°C
R/W [9-07]~[9-08]°C, step: 1°C
[2-0C]=0
18°C
[2-0C]=1
7°C
[2-0C]=2
18°C
R/W [9-07]~[9-08]°C, step: 1°C
[2-0C]=0
22°C
[2-0C]=1
15°C
[2-0C]=2
22°C
R/W 25~43°C, step: 1°C
35°C
R/W 10~25°C, step: 1°C
20°C
R/O No DHW
R/O
0: No DHW pump
1: Instant hot water
2: Disinfection
3: Circulation
4: Circulation and disinfection
R/O 0: No
1: Yes (DHW)
R/W 0: No heater
1: External heater
R/W 0: 230V, 1~
1: 230V, 3~
2: 400V, 3~
R/W 0: 1
1: 1/1+2
2: 1/2
3: 1/2 + 1/1+2 in emergency
R/W 0~10kW, step: 0,2kW
0kW
R/W 0~10kW, step: 0,2kW
0kW
R/W 0: No
1: Yes
R/W -15~35°C, step: 1°C
0°C
R/W 0: Restricted
1: Allowed
2: Only DHW
R/O 0~10kW, step: 0,2kW
0kW
Installer setting at variance with
default value
Date Value
4P688017-1A - 2022.09
5/12