Menu Screen - Daikin EWYA004D2V3P Installer's Reference Manual

11 | Configuration

11.3.4 Menu screen

Installer reference guide
112
Submenu
[1]
Room
[2] Main zone
[3]
Additional zone
[4] Space heating/
cooling
[7]
User settings
[8]
Information
[9] Installer settings Restriction: Only for the installer.
[A]
Commissioning
[B] User profile
[C]
Operation
[D] Wireless gateway
Go through the list.
Restriction: Only displayed if a dedicated
Human Comfort Interface (BRC1HHDA used as
room thermostat) is controlling the outdoor
unit.
Set the room temperature.
Shows the applicable symbol for your main
zone emitter type.
Set the leaving water temperature for the
main zone.
Restriction: Only displayed if there are two
leaving water temperature zones. Shows the
applicable symbol for your additional zone
emitter type.
Set the leaving water temperature for the
additional zone (if present).
Shows the applicable symbol of your unit.
Put the unit in heating mode or cooling mode.
You cannot change the mode on cooling only
models.
Gives access to user settings such as holiday
mode and quiet mode.
Displays data and information about the
outdoor unit.
Gives access to advanced settings.
Restriction: Only for the installer.
Perform tests and maintenance.
Change the active user profile.
Turn heating/cooling functionality on or off.
Restriction: Only displayed if a wireless LAN
(WLAN) is installed.
Contains settings needed when configuring
the ONECTA app.
Example:
7.1
Language
Time/date
Holiday
Possible actions on this screen
Description
EWAA004~008D + EWYA004~008D
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P688013-1B – 2022.09