Table of Contents
Advertisement
Connecting the unit
6.5 Making the waste water connection
6.5.1 Determining the type of connection to the sewer system
42
4. Connect T-piece to the unit.
5. Connect the connection line for softened drinking water to the T-
piece using a seal.
6. Open the drinking water tap and check the threaded fittings for
leakage tightness.
7. Fill out the Start-up operation report.
Waste water installation tasks
Waste water installation tasks on waste water systems and the unit
may only be carried out by a specialized company that is responsible
for waste water systems. The applicable regional regulations,
standards and guidelines must be observed, as well as the
connection conditions imposed by the operator of the waste water
company responsible.
Technical qualifications for waste water installation tasks
Waste water installation tasks on waste water lines and the unit may
be carried out only by a waste water specialist provided by the
specialist company contracted.
The units can be equipped with either an automatic or manual
cleaning system. The symbol on the control unit indicates which
cleaning system is installed.
Cleaning system
Automatic cleaning system
Manual cleaning system
Installation instructions
Waste water mains connection type
• Permanent connection
• Free discharge
• Free discharge
Advertisement
Table of Contents
