Setting The Water Filter Maintenance; Possible Settings In The Parameter Level - Henny Penny FlexFusion FSEN610 Operating Manual

Operating the unit

4.5.10 Setting the water filter maintenance

Prerequisite Settings menu displayed

4.5.11 Possible settings in the parameter level

Prerequisite The Settings menu is displayed
34
2. The Brightness in percent menu is displayed.
The roller shows the current value.
3. Using a swipe gesture, set the roller to the desired value.
4. Press the "OK" button.
The background lighting is set.
1. Tap the "Water filter maintenance" field.
2. The Water filter maintenance menu is displayed.
The value entered for when to remind you about water filter
maintenance is displayed.
The amount of water filtered since the last filter change is
displayed.
The value for water filter maintenance can be entered on the
keyboard and confirmed by pressing the "OK" field.
1. Tap the "Settings parameters" field.
The Settings parameters menu is displayed.
2. Using a swiping gesture, set the rollers to the desired parameter.
The designation of the selected parameter is displayed.
3. Tap the "Read" button.
The current value of the selected parameter is displayed.
4. Delete the current value with the keyboard.
5. Enter the new value with the keyboard.
6. Tap the "Write" button.
The displayed value is adopted for this parameter.
The parameter is changed.
Operating instructions