Husky Altanium Delta5 User Manual page 241

User Guide
Figure 15-42 Route Cables
8.
IMPORTANT!
The AC/DC Adapter provides power to the secondary touch monitor and is required to be
plugged into its own power source. It is important that a power source is always available
when you select the location of the secondary touch monitor.
CAUTION!
The AC/DC Adapter is rated for an input voltage of 100-240 VAC, 50/60 Hz. Connection to a
voltage outside this range could result in catastrophic damage to the adapter and touch
monitor.
Figure 15-43 Configure AC/DC Adapter
Install the Dual Touch Monitor
Configure the AC/DC Adapter for the extension cable plug type that is compatible with
the electrical outlet where it will be connected. Refer to
v 1.0 — February 2020 Maintenance
Figure 15-43.
229