Change The Zone Shown On The History Plot Screen - Husky Altanium Delta5 User Manual

12.2.4 Change the Zone Shown on the History Plot Screen

To change a zone shown on the History Plot screen, do the steps that follow:
1.
Figure 12-5
1. Minimize/Maximize Buttons
2.
3.
4.
162
On the History Plot screen, touch the Variable Selection button of the zone or process
to be changed. Refer to
The Process History Variable Selector dialog window shows. Refer to
Process History Variable Selector Dialog Window
Touch the Minimize/Maximize buttons to navigate to the selection you want.
Touch the heat zone or process you want to see.
Touch the Accept button.
v 1.0 — February 2020
Figure 12-3.
Altanium Delta5
Figure 12-5.
Change the Zone Shown on the History Plot Screen