Husky Altanium Delta5 User Manual page 111

User Guide
Figure 9-2
1. Filter Button 2. Card Layout Screen Button
The information on the Event History screen is described in
Table 9-5
Number of Events
Filter
Date/Time
Source
Description
Mold
Mold Setup
Event History Screen
v 1.0 — February 2020
Event History Screen
Event History Screen Information
Item
This number shows how many events are listed on the Event History
screen.
Lets you select the type of events shown on the Event History screen. The
event types include:
• Zone Alarms (active and inactive)
• Alarms (active and inactive)
• Warnings (active and inactive)
• Setpoint Changes
• Setup (changes)
• HMI Startup
• Out of Specification (events)
The date and time that the event was triggered.
The cause of the event.
The description of the event.
Shows the mold that is related with the mold setup that was loaded
when the event occurred.
Shows the mold setup that was loaded when the event occurred.
Table 9-5.
Description
Heat the Mold
99